1,283
edits
Changes
Jump to navigation
Jump to search
no edit summary
<b>The UART connection parameters of the kit are: 230400 baud, 8 bits, 1 stop bit, no parity, no flow control.</b>
== Connection to PC - Possibility Two - via integrated WiFi-Access Point ==
Once you power-up the sensor module in WiFi configuration, the WiFi module’s LED is flashing in blue. The WiFi module opens an own access point. This may last approximately 40 seconds. Please set the WiFi module of your PC to use automatic IP address selection via DHCP to get an IP address from the sensor. If your PC’s WiFi module uses a static IP, it might not be possible to connect to the WiFi module of the sensor. Connect to the sensor’s WiFi access point using the following login credentials:
<b>The UART connection parameters of the kit are: 230400 baud, 8 bits, 1 stop bit, no parity, no flow control.</b>
== Connection to PC - Possibility Two - via integrated WiFi-Access Point ==
Once you power-up the sensor module in WiFi configuration, the WiFi module’s LED is flashing in blue. The WiFi module opens an own access point. This may last approximately 40 seconds. Please set the WiFi module of your PC to use automatic IP address selection via DHCP to get an IP address from the sensor. If your PC’s WiFi module uses a static IP, it might not be possible to connect to the WiFi module of the sensor. Connect to the sensor’s WiFi access point using the following login credentials:
