1,283
edits
Changes
Jump to navigation
Jump to search
→Connection to PC - Possibility One - via UART
<b>The UART connection parameters of the kit are:</b>
<b>For firmware version 1.4 230400 or above : 1000000 baud, 8 bits, 1 stop bit, no parity, no flow control.</b> <b>For (depending on the flashed firmware versions older than 1.4 : 230400 baud), 8 bits, 1 stop bit, no parity, no flow control.</b>
Please see [[Evalkits #Software]] section to find detailed information about how to connect EvalKit ( Silicon Radar WebGUI or terminal program). If you want to proceed with Silicon Radar WebGUI, you can consider [[Evalkits #WebGUI]] section or if you want to continue with a terminal program you can follow [[Evalkits #Terminal Program]].
