1,283
edits
Changes
Jump to navigation
Jump to search
→SiRad Easy® Evalution Kit
Requirements:
*MS Windows 7/10*32 bit Java 8 JRE/JDK 1.8.0-111*Google Chrome or Mozilla Firefox
*ST-LINK USB driver (STSW-LINK009) [http://www.st.com/content/st_com/en/products/embedded-software/development-tool-software/stsw-link009.html]
*Software Package by Silicon Radar [https://login.siliconradar.com]
== Connection to PC - Possibility One - via USB ==
Connect a USB cable (mini to type A) to the Evaluation Kit and to a PC. An LED will light up to show that the board is powered and working. Go to the STMicroelectronics webpage and download and install the ST-LINK USB driver (STSW-LINK009). Get the software package for PC from the Silicon Radar webpage [https://login.siliconradar.com]. Open the COM2WebSocket tool of the software package and connect to the Evaluation Kit using the 230400 baud setting. Open the WebGUI tool of the software package by opening the ‘startEasy.html’ file in a Chrome or Firefox Webbrowser and connect to the Evaluation Kit.
<b>The UART connection parameters of the kit are:</b>
<b>For firmware version 1.4 230400 or above : 1000000 baud, 8 bits, 1 stop bit, no parity, no flow control.</b> <b>For (depending on the flashed firmware versions older than 1.4 : 230400 baud), 8 bits, 1 stop bit, no parity, no flow control.</b>
Please see [[Evalkits #Software]] section to find detailed information about how to connect EvalKit ( Silicon Radar WebGUI or terminal program). If you want to proceed with Silicon Radar WebGUI, you can consider [[Evalkits #WebGUI]] section or if you want to continue with a terminal program you can follow [[Evalkits #Terminal Program]].
