1,283
edits
Changes
Jump to navigation
Jump to search
no edit summary
Switch to the <b>Open file</b> tab and chose the firmware file you want to flash. Then click the <b>Download</b> button to flash the firmware to the device. It should take some minutes. The flash progress can be observed with the green progress bar in the bottom of the tool. Just close the tool after the finished flash progress.
<b>Trouble shooting:</b> If STM32CubeProgrammer does not want to connect to the device, please check that the port is closed in the terminal program.
=== Use STM32Flash (Open Source) to flash the firmware ===