1,283
edits
Changes
Jump to navigation
Jump to search
→Software Requirements
'''For firmware updates with external debugger and SiRad Easy r4 Breakout Board:'''
*Debugger: STLINK-V3MINI [https://www.st.com/en/development-tools/stlink-v3mini.html] OR STM32 Nucleo-64 development board [https://www.st.com/content/st_com/en/search.html#q=STM32%20Nucleo-64%20development%20board-t=tools-page=1]
*micro USB to type A cable (STLINK-V3MINI) OR mini USB to type A cable (Nucleo-64)
*(Nucleo-64 only) 6pin jumper cable (female-female) OR self-made programming cable
