262
edits
Changes
Jump to navigation
Jump to search
→Parameter Setting
- Go to RFE Parameters tab
- Adjust the base frequency to higher frequencies until you have a reasonable output like in the second picture with only a small DC peak (for me it was recommended value of 289’000 MHz)
- Adjust bandwidth to higher bandwidth, for example, 20’000 MHz
- Go to BB Processing tab
Fig. 4: Radar Measurement following the parameter setting,
still targeting an object in a distance of 2 meters.
== Return to Operation with automatic recognition of Radar Front Ends ==
For operation of SiRad Easy radar front ends with automatic recognition exchange the front end boards as previously used and restart operation.